LED Strip vs LED Batten: Which One for Kitchens, Garages and Under Cupboards?
Shamrock ElectricalShopping for LED strip lights? See the range, with free delivery anywhere in Ireland from the first euro.
Use an LED batten when you need to light a whole room, and LED strip when you need light along a line or tucked out of sight. A batten is a rigid fitting that puts out enough to work under. Strip is flexible tape that runs where a fitting will not go, under a cupboard, in a cove, along a shelf.
The confusion is understandable, because in Ireland people call both of them strip lights. If you ask for kitchen strip lights in a shop you might be shown either. At Shamrock Electrical in Rathcoole, just off the N7, we stock both, so here is the difference in plain terms.
What the two words actually mean
An LED batten is a sealed linear fitting, usually 2ft to 5ft, that screws to a ceiling or wall and wires into a supply. It is one unit, one light output, and it does the main lighting job. Our 3ft slimline LED fixture gives 3000 lumens at 30W, which is a real working light rather than an accent.
LED strip is flexible tape on a reel, cut to length, stuck down, run from a driver. Our LED strip light ribbon is 5 metres at 24W and IP65 rated in warm or cool white. It is bright enough to light a worktop and not bright enough to light a kitchen.
That is the whole distinction. Batten lights the room. Strip lights the surface or the shape.
For a kitchen
Most kitchens want both, doing different jobs.
Under the wall units, use strip or a slim under counter batten. The point here is to light the worktop without standing in your own shadow, which a ceiling light cannot do. The Philips Pentura Mini under counter light is the tidy option, very slim, in warm white 3000K or neutral white 4000K, and it fits neatly under a shelf. Strip suits it too if the run is awkward or you want it hidden entirely.
Overhead, that is a ceiling light or downlights, not strip. This is where people go wrong, buying strip for the ceiling and finding the room dim.
Worth knowing on colour: 3000K warm white is the softer, more domestic look. 4000K neutral is crisper and shows food preparation more clearly. Many people put 4000K under the units and something warmer overhead.
For a garage, shed or workshop
Battens, without hesitation. You want brightness, coverage and something that survives the conditions. Strip is the wrong tool.
Our 5ft slimline batten in 4000K covers a standard garage well. Where there is damp or dust, and in most Irish garages and farm sheds there is, use a corrosion proof fitting instead. The Twin LED corrosion proof IP65 is built for workshops, factories and farm sheds, with a Tridonic driver and Osram chip, and can be surface, suspension or conduit mounted.
For accent, mood and colour
Strip, every time. Coves, stairs, shelving, behind a TV, along a plinth. This is what tape was made for and no batten will do it.
If you want colour rather than white, the LED Flexi strip kit in RGB and the S-RIB 5M RGB strip with remote both come as complete kits, so there is nothing to work out about drivers.
The practical differences that decide it
- Fitting. A batten screws up and wires in, by an electrician. Strip sticks down and runs from a plug in driver, which most people manage themselves.
- Output. Battens are measured in thousands of lumens. Strip is measured per metre and is far lower. Never expect strip to replace a ceiling light.
- Shape. Strip bends and cuts to length. A batten is a fixed size, so measure before you buy.
- Damp. Both come IP rated. Check it. IP65 strip is fine under a kitchen unit or outside under cover, and a corrosion proof batten is the right answer for a wet shed.
- Replacing. A failed batten is unscrewed and swapped. A failed strip run usually means peeling off the whole length and starting again.
Quick answer by room
- Kitchen worktop: under counter batten or IP65 strip
- Kitchen ceiling: ceiling fitting or downlights, not strip
- Garage or workshop: 4ft or 5ft batten, corrosion proof if damp
- Farm shed: corrosion proof twin batten
- Stairs, coves, shelving, TV: strip
- Outdoors under cover: IP65 strip or an IP65 batten
Buying either from Shamrock Electrical
We are an Irish owned electrical supplier in Rathcoole, County Dublin, just off the N7 and well positioned for the M50. We stock LED strip in white and RGB, slimline battens from 3ft to 5ft, under counter fittings and corrosion proof twins, and we deliver free on every order to all 26 counties with no minimum spend. You can also order for collection from the counter, usually ready in 2 to 4 days.
The wider ranges are in LED strip lights and kitchen lights.
Frequently Asked Questions
Q: What is the difference between LED strip and an LED batten?
A: An LED batten is a rigid sealed fitting, usually 2ft to 5ft, that wires into a supply and lights a whole room. LED strip is flexible tape cut to length and run from a driver, used for accent lighting, coves and under cupboards. Battens light rooms, strip lights surfaces and shapes.
Q: Can I use LED strip to light a whole kitchen?
A: No. Strip is far lower output than a ceiling fitting and will leave the room dim. Use strip or a slim under counter fitting beneath the wall units to light the worktop, and a proper ceiling light or downlights overhead.
Q: Which is better under kitchen cupboards, strip or a batten?
A: Either works. A slim under counter batten such as the Philips Pentura Mini is tidier and easier to replace. Strip is better where the run is awkward, where you want the light source completely hidden, or where the length does not match a standard fitting.
Q: What lighting should I use in a garage or shed in Ireland?
A: LED battens. A 4ft or 5ft slimline batten covers a standard garage. If there is damp, condensation or dust, which is common in Irish garages and farm sheds, use an IP65 corrosion proof batten instead of a standard one.
Q: Do I need an electrician to fit LED strip?
A: Usually not. Most strip kits come with a plug in driver and self adhesive backing. An LED batten wires into a fixed supply and should be fitted by a registered electrician.
Q: Should I choose 3000K or 4000K?
A: 3000K warm white is softer and more domestic, suited to living areas. 4000K neutral white is crisper and shows detail better, which suits worktops, garages and workshops. A common approach is 4000K under kitchen units and something warmer overhead.
Q: Where can I buy LED strip and LED batten lights in Ireland?
A: Shamrock Electrical stocks both, including IP65 LED strip in warm and cool white, RGB strip kits with remotes, slimline battens from 3ft to 5ft, under counter fittings and corrosion proof twin battens. We are in Rathcoole, County Dublin, just off the N7, and we deliver free to every county in Ireland on every order with no minimum spend.