Titan Smart WiFi Radiator Setup: Tuya App, Timer and Open Window Guide
John PhelanShopping for electric radiators and heaters? See the range, with free delivery anywhere in Ireland from the first euro.
This guide shows you how to set up a Titan Smart WiFi Electric Radiator: connecting it to the Tuya app, choosing a mode, setting the weekly programme and the 24 hour timer, switching on open window detection, and the safety rules that matter once it is on the wall. It follows the Titan instruction manual for the H600WF, H900WF, H1500WF and H1800WF models, which Shamrock Electrical supplies with free delivery anywhere in Ireland.
Quick answer
Install the free Tuya Smart or Smart Life app, turn on Bluetooth on your phone, press the WiFi button on the radiator and add the new device the app finds. From the app you can then pick Comfort, ECO, Anti freeze or Week program, set a weekly schedule, turn on open window detection and lock the controls. Never run the radiator from a plug in timer or smart plug; use its own timer instead.
The control panel
The controls sit on the end of the radiator, with an LED display and touch buttons:
- On and off button: switches the heater between standby, shown as OF, and heating.
- Timer and open window button: sets the 24 hour timer, and with a long press, the open window setting.
- WiFi button: starts WiFi pairing, or with a 3 second hold, removes the WiFi connection.
- Increase and decrease buttons: change the set temperature by 1 degree per press, from 5 to 35 degrees.
- Three indicator lights: power, timer and WiFi.
When you first plug in and switch on, the radiator goes to standby. Press the on button and it starts heating to the factory setting of 22 degrees.
How to connect the Titan radiator to WiFi
- Download the Tuya Smart or Smart Life app from the Apple App Store or Google Play and create an account.
- Turn on Bluetooth on your phone, and have your home WiFi name and password to hand.
- Press the WiFi button on the radiator. The WiFi light is off from the factory, and the display changes to show it is ready to pair.
- Open the app. It should show that a new device has been found and ask whether to add it. Follow the steps. If it does not appear, tap the plus button in the app and add the device from there.
- When pairing has worked, the WiFi light on the radiator stays on.
To disconnect it, for example before passing the radiator on, hold the WiFi button for 3 seconds, or remove the device in the app.
The four modes
| Mode | Display | Default temperature | Can you change it? |
|---|---|---|---|
| Comfort | HO | 22 degrees | Yes |
| ECO | EC | 17 degrees | Yes |
| Anti freeze | AF | 7 degrees | No |
| Week program | AU | Follows your schedule | Set in the app |
In Comfort, ECO and Week program the display alternates between the mode letters and the set temperature every 3 seconds. Anti freeze is worth knowing about for a holiday home or a room left empty over winter: it holds the room at 7 degrees to keep the frost off without heating it fully.
Setting a weekly programme
The weekly programme is set in the app, not on the radiator. You choose the days, the times and the temperature for each period, then switch the radiator to Week program. This is where the running cost savings come from: the radiator only heats the room for the hours you are actually in it. A 1500W model running flat out costs about €0.57 an hour at the Electric Ireland 24 hour standard rate of 38.04 cent per unit from 1 July 2026, and a schedule plus the thermostat keeps it well below that over a day.
Using the 24 hour timer
- Press the timer button. The display flashes 00.
- Press increase or decrease to set the number of hours. Each press is 1 hour, from 0 to 24.
- Press the timer button again to save, or wait 15 seconds and it saves itself. The timer light stays on red.
When the time runs out the radiator goes to standby. Press the timer button again at any point to change or cancel it. You can also set the timer from the app.
Turning on open window detection
Open window detection is off from the factory. To switch it on, hold the timer and open window button for 5 seconds until the display shows F0, use the buttons to choose ON, then press the timer button to save or wait 15 seconds.
Once it is on, if you open a window wide and the room temperature drops by 2 degrees or more within two minutes, the radiator switches itself off and shows F0. It starts again by itself after 10 minutes, or straight away if you press the on button. You can also switch the feature on and off in the app.
Other app features
- Child lock: set only in the app. Once locked, the buttons on the radiator do nothing, and the lock survives a power cut, with the radiator carrying on in the same mode when the power returns.
- Groups: put several radiators in one zone and control them together, useful for a whole house or an apartment.
- Sharing: share the radiator with other people in the house so they can control it from their own phones.
- Temperature calibration: adjust the reading if the radiator's sensor and your room thermometer disagree.
Resetting the radiator
A reset returns the radiator to its factory settings and clears the child lock. Switch it off at the power switch, switch it on again, and within 10 seconds press and hold the reset button shown in the Titan manual for 3 seconds. You will then need to pair it with the app again.
Fitting and safety rules from the manual
- Mount it level. The radiator hangs on a top hook with a bottom hook fitted between two fins. The manual warns that a radiator not parallel to the floor can develop technical problems.
- Keep curtains and fabrics at least 1 metre from the air outlet, and never cover the radiator.
- Do not fit it directly below a socket outlet.
- No external timers or smart plugs. The manual says the radiator must not be powered through an external switch such as a timer, or from a circuit the supplier switches on and off. Use its own timer and weekly programme.
- Bathrooms: when fixed in place, the controls must be out of reach of anyone in the bath or shower. Have a registered electrician connect a wall mounted radiator to a fused spur.
- Overheat protection: a safety device switches it off if it overheats. Switch it off, clear any dust or covering from the vents, wait at least 5 minutes, then restart it.
- Cleaning: isolate it and let it cool, vacuum the vents and grilles at least once a year, and wipe the outside with a damp cloth.
Frequently asked questions
How do I connect a Titan radiator to WiFi?
Download the Tuya Smart or Smart Life app, switch on Bluetooth on your phone, then press the WiFi button on the radiator. The app shows a new device; follow its prompts to add it. When it is connected the WiFi light on the radiator stays on.
Which app does the Titan Smart WiFi radiator use?
The free Tuya Smart app or the Smart Life app, on iPhone or Android. Both control the same features: on and off, the four modes, the weekly programme, the 24 hour timer, open window detection, the child lock, grouping and sharing.
What are the Comfort, ECO and Anti freeze modes on a Titan radiator?
Comfort holds 22 degrees by default and shows HO. ECO holds 17 degrees by default and shows EC. Both defaults can be changed in the app. Anti freeze holds a fixed 7 degrees and shows AF. Week program follows the schedule you set in the app and shows AU.
How does open window detection work on the Titan radiator?
It is off by default. Hold the timer and open window button for 5 seconds to reach the setting, switch it on and save. If the room drops 2 degrees or more within two minutes, the radiator switches itself off, shows F0, and restarts after 10 minutes, or sooner if you press the on button.
Can I plug a Titan radiator into a timer switch or smart plug?
No. The Titan manual says the radiator must not be powered through an external switch such as a timer, because an accidental reset of the thermal cut out could be dangerous. Use the built in 24 hour timer and the weekly programme in the app instead.
How do I unlock or reset a Titan radiator?
The child lock can only be set and cleared in the app. To reset the radiator to its factory settings, which also clears the lock, switch it off at the power switch, switch it back on, then within 10 seconds press and hold the reset button described in the manual for 3 seconds.
Why has my Titan radiator switched itself off?
Either the timer has finished, open window detection has seen a sharp temperature drop and shows F0, or the overheat safety device has tripped. For an overheat, switch it off, check the air inlets and outlets are clear of dust and covers, wait at least 5 minutes, then switch it back on.
How far should curtains be from a Titan radiator?
The Titan manual asks for textiles, curtains and other flammable material to be kept at least 1 metre from the air outlet, and the radiator must never be covered. It should also not be fitted directly below a socket outlet.
Buy the Titan Smart WiFi radiator with free delivery
The Titan Smart WiFi Electric Radiator comes in five sizes from 600W to 1800W, in white or matt black, with a 10 year warranty on the aluminium body and a 2 year warranty on the electrics. Every order ships free from the very first euro, with no minimum spend, and new customers take 10 percent off a first order. Not sure which size you need? Read our panel heaters vs oil filled radiators guide, browse the wall mounted electric heaters, or call us on 01 401 9907. We are an Irish owned electrical supplier based in Greenogue Business Park, Rathcoole, Co. Dublin.